Removing the cover will reveal the drive, which is itself typically attached with a few screws. If you're in 10.7 or later, you'll need to select the "Reinstall Mac OS X" option from the Mac OS X Utilities screen. Buying a newer second drive (if all are PATA) will avoid the conflict. Old fragments can come back to haunt you from old installations. Source
The PC requests the information and then waits until it is processed by the drive... This rule isn’t absolute, however, because some all-in-one computers use 2.5″ drives. You should be able to decipher which is your old drive. The new system runs XP Professional andthe old system runs 2000 Professional. http://www.tomshardware.com/forum/286056-32-hard-drive-system
Why do researchers use extremely complicated English sentences to convey their meaning? Would it be possible to take the hard-drive from the old computer and install it into the newer computer in a way that I can access all the files? The Result: Moving a Windows Installation Is Complicated All that said, moving a Windows installation to another computer is possible…in some cases. I have accessed the BIOS and have seen that all the devices are recognized and seem to be stable.
It had the slave connector in the middle so that was good. If the exact configuration of that Windows system is so important to you, you might want to consider converting the Windows installation on that computer to a virtual machine image, allowing The color coding on the wires is red, two blacks, and a yellow wire. Clone Mac Hard Drive Disk Utility Flag Permalink This was helpful (0) Collapse - Problem swapping HDD's by swjslj / September 17, 2005 5:33 AM PDT In reply to: Swapping Hard drives All NT based operating systems,
Also please exercise your best judgment when posting in the forums--revealing personal information such as your e-mail address, telephone number, and address is not recommended. Enter Your Email Here to Get Access for Free:Go check your email! Smith January 25, 2011 at 6:15 pm I haven't tried an IDE to SATA clone myself. If you haven't already done so, shut down your new machine normally; then physically remove the power plug from the back of the computer chassis.
This due to having two separate controllers. Enclosure For External Drive Old hard drive in new computer. The sysprep /generalize command removes unique information from your Windows installation, which enables you to reuse that image on different computers. How to temporarily mark a trail?
Everything from your operating system to your emails to your favorite songs are stored on your hard drive. Follow the steps as they are presented to you, making sure to select your new drive (the one you just formatted in the previous step) as the install location. Transferring Files From External Hard Drive To Mac Just make sure to write down the position of any switch or anything else before you do any changeIf you have only 1 IDE connector in your mother board:Make sure the Mac Migrate To New Hard Drive Not the answer you're looking for?
When you install it onto a computer, it configures itself for the hardware. http://kodeuwa.com/hard-drive/old-ide-hard-drive-cable-or-drive-enclosure.html This tool is well worth the money and can even restore deleted or lost partitions, resize, re-partition, boot, clone, fix master boot record, and so on and so forth. Today, most hard drives use a data connection known as SATA. It had an error message (boot error, please insert disc to start) when I continued from there. Clone Mac Hard Drive To Ssd El Capitan
They do indeed have different controllers and will not interfere with each other. I had some stronger wording in my original post that basically said that it is impossible to do - but it's not... A new hard drive will also allow you to do a clean install of Windows and keep your current data safe. http://kodeuwa.com/hard-drive/old-system-files-on-old-hard-drive.html Most laptops will offer a plastic hard drive bay cover on the bottom of the laptop that is held in with one or two screws.
Then your new drive will recognize and read the old drive. Migration Assistant From External Hard Drive To Mac You see the 2nd drive now. When transferring your data from one drive to another, we highly recommend you install a fresh copy of OS X, and then use Apple's Migration Assistant to migrate your data to
Required fields are marked *Comment Name * Email * Matt Smith 908 articles Matthew Smith is a freelance writer living in Portland Oregon. However, solid state hard drives often come in the 2.5″ size regardless of the type of machine they’re meant to be installed in. Select the language you want to use and then proceed to the next step. Clone Hdd To Ssd Mac Disk Utility There is an option for "Files and Folders," which you will likely want to bring over as well, since some applications install some settings in non-standard places.
Select the new OS X volume in the list on the left, then click on the "First Aid" tab, then click on "Repair Disk Permissions". by tru2Gzus / September 21, 2005 4:57 AM PDT In reply to: No black jumpers Ok, the solution was as simple as the right jumper position which I used the diagram If you can do that, you might find it easier to rejumper the optical drive, and leave the old hard drive alone.At this point, you should have one device jumpered as http://kodeuwa.com/hard-drive/old-hard-drive-isnt-working-as-an-external-drive.html I have a tower (dell.
solved How to use old hard drive with new PC and keep operating system while wiping the drive? On the diagram you'll see M or MA (for master) S or SL (for slave) and C or CS (for Cable Select). CONTACT US: 1-800-275-4576 OR +1-815-338-8685 LIVE CHAT CUSTOMER SUPPORT ACCOUNT LOGIN My Account Order Status Write a Review Warranty & Returns SSD MacBook ProMacBookMac miniiMacMacBook AirMac ProShop All SSDs MEMORY MacBook Depending on how much you're transferring, this can take a while.
Please everyone give the winners and all those members who went the extra mile to fully explain in details the process of moving an old hard drive to a new computer, Windows systems don't work like this, though. Good luck to you and come back if you have any more questions. If you’re using a computer that has more than one hard drive bay you’ll find the process of transferring data from one drive to another to be easy.
Drives for the most part are pretty cheap.I have worked on many systems from very simple to enterprise and it has been an issue to varying degrees.Todd Flag Permalink This was Fortunately, most optical drives, such as DVD burners and CD readers, still use the old PATA specification. STEP #12 Double-check your files Run all your apps and go through your files to make sure everything is working and nothing is missing. Expert Support.
Is it possible to write two separate Master's theses?