But when I restarted the pc windows didn't want to load. I tried to set the master harddrive as master, and the laptop as slave but it says cannot boot and gives me an error. How should I resolve this? If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post).
You might need some changes to start up to insure files are being pulled from "D" vice "C". I have tried to use disk clean upetc tells me I don't have any space at all I am totally confused thank you would like to hear some advice from someone Second, and far more important issue: I also have done my windows updates, bringing the relevant installation up to SP3. I think you should install from XP again, since I've always done that and it's always been successful.
DTI Data Recovery July 23, 2007 3:53 pm Reply # Alysia, I don't know if Walmart has them, you would have to call them. Short DST-Pass Short Generic- Pass Long DST-Pass Long Generic- I assume that there is hope for retreiving the data with the above diagnodtics. It's a great help if you get into troubles.Kees Flag Permalink This was helpful (0) Collapse - Many thanks to Kee, remusson and rhbass by grandpaw7 / August 26, 2004 11:16 Firmly grab the back and top of the hard drive and pull back to free it.
There is very rarely an occasion where I totally have to wipe someone's computer in order to fix it anymore…. Michele December 26, 2007 7:11 pm Reply # Michael, I've been reading these posts on how to setup a slave and master and it doesn't seem to be working. very helpful. How To Partition A Hard Disk I don't think there is any physical problem with the drive.
I have successfully hooked up a different hard drive to this machine, but my maxtor drive didn't work. This post has been flagged and will be reviewed by our staff. Thanks again Manish April 29, 2009 Mark I thought I'd lost all our pictures, wedding organiser, music collection etc. look at this site Reply to this» Steve C says: April 24, 2015 at 4:40 am Deathbot 9000?
It's been a few years since I ran dual XP systems, but as I recall, if you boot to the one on C drive and then do install to second drive, How To Connect Old Hard Drive To New Computer XP is still being used by millions. You can use our software to extract the data, then you can go ahead and format it. So when I got a new drive and updated software, I left my "old" drive as "C" and installed the larger drive on D & E (partitioned).Occasionally, malware gets in (family
I will check this blog often. 🙂 Reply Jack Roberts says: September 20, 2006 at 7:51 am Hello, You guide worked perfectly for removing my XP Pro/Vista dual boot. Personally, I have a nice geekstick that has a linux system on it for this situation, or if it's my laptop, I just boot into my linux and backup from there. Install Old Hard Drive In New Computer The drive shows up as the e drive but it wants to format the drive. Moving Hard Drive To New Computer Windows 10 It claims cannot load ntldr I've done this vista installation three times now.
Reply to this» Phill says: April 24, 2015 at 2:31 am shoved aside when my problem isn’t one that can’t be fixed by NOT being a mormon. This is bad enough when you've just got one audio card and stereo speakers, and even then it can go wrong (I had the delightful experience last year of a brand On the whole, I agree: It's almost always a better choice to reinstall Windows on the new machine, the programs still desired, and any data from the system image/old HDD/backups one Reply to this» Forty says: April 24, 2015 at 8:11 am Come to the Penguin side, where everything works out of the box (unless you're using arch/slackware/gentoo), and the whole OS How To Install A Second Sata Hard Drive
DTI Data Recovery August 30, 2007 4:03 pm Reply # Zeus, DART XP will do the job if your drive was running Vista, XP or Server 2003. As for the defrag problem try reinstalling windowsover the top of your existing installation BUT make sure you run the adaware scans before you do this to make sure they do January 19, 2009 RH First time crash and I was able to transfer everything I needed/ that hadn't been backed up quite easily to my external. In addition, if giving the drive away, I would be sure to be responsible to help the kids when the drive does fail.
It is used for Pentium 1-4. Can I Put My Hard Drive In Another Computer however, i have a little problem. When the old drive dies, and it will, that's the time to replace it and retrieve those same files from the main drive to the newest one.
Will the presence of a corrupt ME on the slave disk cause a problem, before I can pull off the datafiles? by robcel / September 2, 2004 10:08 PM PDT In reply to: Install old hard drive as slave drive? July 30, 2008 Chris nikujin: Try burning the ISO file at the lowest possible speed. How To Get Data Off An Old Hard Drive The drive says, "Master/Slave jumper not requred for SATA" so obviously I only need to connect power and the SATA cable, correct?
Ubuntu would not recognize anything I plugged in. Im currently formatting my hard drive. total amature August 4, 2008 1:42 pm Reply # First, this blog is awesome! March 7, 2009 kris This is the error I get, very similar to the error Dsherlock got: Once I do the force mount this is the error I get: NTFS is
You need to do something like "bcdedit /default ##GUID of your XP install##". Gee, I should be without for what, about two weeks. Or, can I just reformat the Vista drive (L:) and install Vista64 there? Reply to this» 4th Dimension says: April 24, 2015 at 6:37 pm You mean when it freezes.
July 18, 2008 Merr Ubuntu is the best os and i have it on my laptop but im a gamer so i have windows on my desktop. They are usually labeled (SATA0 SATA1 etc) I would recommend in your situation to have a new drive FULLY loaded with the OS and everything before adding this drive as to All this of course would be a minor issue, if they just told them that this would happen (and would take a day…), or we weren't over and needed to urgently This problem has been happening to me every couple of days and hard restarts do solve it but it wil pop up again in couple of days.
So I would say that either making a bartPE CD (which you need access to a machine running windows XP) or to plug your drive into another computer. Good luck!Enjoyed this post? Restarted, and BAM!